|
A use of the machine without safety cover plates are not allowed
Trouble shooting (chapter 8)
Before trouble shooting the machine, the following has to be observed:
Persons, who are working for trouble shooting at the machine may be hurt by the, who are working for trouble shooting at the machine may be hurt by the moving machine parts:
-
Trouble shooting must be done only by trained and responsible persons.
-
Before trouble shooting the machine , the power supply must be cut off.
-
Make sure, nobody can switch on the power supply during trouble shooting, thus putting the press back into operation
-
Trouble shooting of the hydraulic system is only allowed with the pressure ram on lowest position and no pressure applied to the hydraulic system.
-
Before putting the machine back to operation check if all safety cover plates are remounted and the function of all safety devices are OK
|
